dc/dc converters thi 2m series, 2 watt features ultracompact dip 16 package i/o isolation 3000 vacrms rated for 300 vrms working voltage medical safety to ul 60601-1 and iec/en 60601-1 3rd edition, 2 x moop industrial safety to iec/en/ul 60950-1 operating temp. range C40c to +71c 3-years product warranty order code input voltage range output voltage output current max. effciency typ. thi 2-0511m 5 vdc 400 ma 66 % thi 2-0512m 5.0 vdc 10% 12 vdc 165 ma 66 % thi 2-0513m (nominal 5 vdc) 15 vdc 133 ma 66 % thi 2-0522m 12 vdc 83 ma 72 % thi 2-0523m 15 vdc 66 ma 73 % thi 2-1211m 5 vdc 400 ma 66 % thi 2-1212m 12.0 vdc 10% 12 vdc 165 ma 66 % thi 2-1213m (nominal 12 vdc) 15 vdc 133 ma 66 % thi 2-1222m 12 vdc 83 ma 74 % thi 2-1223m 15 vdc 66 ma 75 % thi 2-2411m 5 vdc 400 ma 66 % thi 2-2412m 24 vdc 10% 12 vdc 165 ma 66 % thi 2-2413m (nominal 24 vdc) 15 vdc 133 ma 66 % thi 2-2422m 12 vdc 83 ma 74 % thi 2-2423m 15 vdc 66 ma 75 % models the thi 2m series is a new range of ultra-compact 2w dc/dc-converters providing a high i/o-isolation voltage of 3000 vac. with a reinforced i/o-isolation system this product is an economical solution for many applications in instrumentation, industrial controls, medical equipment and everywhere where supplementary- or reinforced insulation is required to meet requested safety standards. full smd-design with exclusive use of ceramic capacitors ensure a very high reli - ability and a long product lifetime. c b scheme page 1 of 3 u l 60950 -1 ul 60601-1 iec 60950 -1 iec 60601-1 http://www.tracopower.com
page 2 of 3 dc/dc converters thi 2m series 2 watt input specifications input current no load / full load 5 vin models: 60 ma / 600 ma typ. 12 vin models: 30 ma / 250 ma typ. 24 vin models: 15 ma / 135 ma typ. reverse voltage protection 0.3 a max. recommended external input fuse (slow blow) 5 vin models: 1.0 a 12 vin models: 0.5 a 24 vin models: 0.2 a surge voltage (1 sec. max.) 5 vin models: 9 v max. 12 vin models: 18 v max. 24 vin models: 30 v max. input filter internal capacitors output specifications voltage set accuracy 4 % voltage balance (dual output models) 1 % max. regulation C input variation 1.2 % / 1 % change of vin C load variation 20 C 100 % 10 % max. 12 % max. for 5 vout models. ripple and noise (20 mhz bandwidth) 150 mvpk-pk max temperature coefficient 0.02 %/k short circuit protection 0.5 sec. max. minimum load 2 % of rated max. current capacitive load single output models: 330 f max. dual output models: 100 f max. (each output) general specifications temperature ranges C operating C40c to +71c C storage C40c to +125c C casing +90c max. derating 2.5 %/k above 60c humidity (non condensing) 95 % rel. h max. reliability, calculated mtbf (mil-hdbk-217f, @ 25c, ground benign) >2.0 mio h isolation voltage C input/output reinforced, rated for 300 vrms working voltage (50hz, 60sec) medical applications in accordance to iec/en 60601-1: 3000 vac, 2 x moop it applications in accordance to iec/en 60950-1: 4000 vac isolation test voltage (1 sec.) 6000 vpk leakage current (at 240vac, 60hz) 2 a max. isolation capacity C input/output 20 pf max. (at 100khz, 1v) isolation resistance C input/output >10 gohm (at 500vdc) switching frequency 50 C 100 khz (pfm) safety standards iec/en 60950-1, ul 60950-1 csa c22.2 no. 60950-1-03 iec/en 60601-1 3rd edition, 2 x moop, ul 60601-1, csa c22.2 no. 601.1 safety approvals C csa certificate for medical electrical equipment www.tracopower.com/products/thi2m-csa60601.pdf for information technology equipment www . tracopower . com / products/thi2m-csa60950.pdf C cb test certificate for medical electrical equipment www.tracopower.com/products/thi2m-cb60601.pdf for information technology equipment www.tracopower.com/products/thi2m-cb60950.pdf all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated. http://www.tracopower.com http://www.tracopower.com
rev. july 8. 2013 page 3 of 3 general specifications casing material non conductive plastic (ul 94v-0 rated) weight 5.1 g (0.18oz) soldering temperature max. 265c / 10 sec dc/dc converters thi 2m series 2 watt outline dimensions 10.16 1.77 (0.54) 13.7 (0.07) (0.02) (0.94) 23.8 2.54 15.24 3.0 (0.12) (0.10) (0.60) 0.5 8.6 (0.34) (0.13) 3.2 1 7 8 16 10 9 bottom view pin single dual 1 Cvin (gnd) Cvin (gnd) 7 no con. no con. 8 no con. common 9 +vout +vout 10 Cvout Cvout 16 +vin +vin pin-out dimensions in [mm], () = inch pin diameter: 0.5 0.05 (0.024 0.002) tolerances: 0.25 (0.01) pin pitch tolerances: 0.05 (0.002) application note: www.tracopower.com/products/thi2m-application.pdf - the component is not be used in an oxygen rich environment. - the component is not to be used in conjunction with fammable anaesthetics and agents. - the component has to be disposed appropriately. please refer to local regulations (waste electrical and electronic equipment). - a modifcation of the component is not allowed. sp ec i?cati ons can be changed wi thout noti ce! make sure you are using the latest documentation, downloadable at www.tracopower. com www .tracopower. com
|
